- There are no more items in your cart
- Shipping
- Total € 0.00
VCHA01-2 Class D Amplifier 2x40W RMS at 8ohm - HDMI audio input - ARC/CEC system TV remote control
Axiolab - VCHA01-2
Welcome to our Axiolab VCHA01 amplifier board. The VCHA01 card is designed for full integration with your TV. By connecting the VCHA01 card to the HDMI ARC port of the TV, the audio signal will be routed to the card and controlled with the TV remote control. The VCHA01 card does not use an IR sensor, but communicates with the TV to control the volume of the audio system or turn on / off together with the TV.
This card works only with an HDMI ARC device. Check this feature on your TV.
High quality capacitors, including X7R ceramic capacitors and lower ESR electrolytic capacitors, are used to achieve better sound, a high S / N ratio, a low THD + N, a wide frequency response range.
How to use the Card
1) Connect the power supply to the power socket connector.
2) Connect the speaker cable to the connectors.
3) Turn on the power.
4) Connect the HDMI cable.
5) Turn on the TV.
6) If the TV ARC and CEC protocol are enabled, on most televisions, the card will be connected to the TV and the audio will start to exit the card.
7) If the card is connected, the TV will not connect automatically. The card must be activated from the TV audio menu.
8) There is an LED near the HDMI connector which indicates that the TV has accepted the ARC request from the card and that the connection with the TV has been established.
9) Samsung TV professional series does not have the ARC function enabled by the warehouse. You must contact Samsung and request the procedure to enable the ARC.
DSP settings
A small DSP allows you to set an equalizer, a compressor or another simple function to improve the performance of the audio system.
The DSP programmer is the Texas Instrument PurePath motherboard.
Link: http://www.ti.com/tool/PUREPATH-CMBEVM
Turn on the card and wait 10 seconds for the microcontroller to initialize.
Press and hold the programming button until the ARC LED lights up. Now the card is in programming mode.
Download the DSP configuration.
Press and hold the programming button until the ARC LED flashes once briefly. Release the programming button. The ARC LED remains on until the saving procedure is completed.
Turn the card off and on and the microcontroller will automatically load the new DSP configuration.
To disable the loading of the DSP configuration at power on, turn on the amplifier and wait 10 seconds.
Hold down the programming button and the ARC LED will light up. Do not release the button until the ARC LED flashes three times. To enable loading of the DSP configuration upon power up, repeat the previous instructions.
Technical Specifications Sheet VCHA01-2
Other Features Sheet VCHA01-2
Dimensions and dimensions
How can I use it?
- Brand
- Axiolab
- Chips
- TAS5756
- Output Power [Watt]
- 40
- Channel
- 2
- Power Supply (Volt)
- 24
Reference: AA-AB31431
Brand: Wondom - Sure Electronics
AA-AB31431 - 1x750W@4ohm - Class D Audio Amplifier Board - MOSFET IRFB4227
Reference: A05
Brand: AIYIMA
A05 - Aiyima Bluetooth Class D Amplifier 2x105W 4ohm input RCA with power supply
Reference: AA-AB32174
Brand: Wondom - Sure Electronics
AA-AB32174 - 2x50W@4ohm Class D Amplifier - TDA7492
Reference: BRAX MX4 PRO
Brand: Audiotec Fischer
BRAX MX4 PRO - 4 Channel High End Amplifier 4x300W / 2X600W
Reference: AMB2050TR
Brand: Luxus Audio
AMB2050TR - Class D 2x50W Bluetooth 5.0 Audio Amplifier Board Stereo TWS APT-X
Reference: AA-AB32256
Brand: Wondom - Sure Electronics
AA-AB32256 - 2x30W Class D Amplifier Board Digital Input I2S with DAC - TAS5754
Reference: AMB2015AB
Brand: Luxus Audio
AMB2015AB - 2x15 Watt Class D Amplifier board Bluetooth 5.0 APTX-TWS no AUX
Reference: AA-AB31315
Brand: Wondom - Sure Electronics
AA-AB31315 - 1x400W@3ohm Class D Audio Amplifier Board - T-AMP
Reference: AA-AB32391
Brand: Wondom - Sure Electronics
AA-AB32391 - 2x1000W@2ohm Class D Audio Amplifier Board -IRS2092
Reference: AA-AB32971 KIT3
Brand: Wondom - Sure Electronics
AA-AB32971 KIT3 - Class D Amplifier 2x100W @ 4ohm with Volume Control and Power Supply
Reference: D05
Brand: AIYIMA
D05 - Aiyima Bluetooth Class D Amplifier 2x120W 4ohm input RCA with power supply 32V
Reference: AMB3050BR
Brand: Luxus Audio
AMB3050BR - 2x50W + 1x100W Class D Bluetooth 5 Amplifier with APT-X TWS and DSP ADAU1701