Amplificatore in Classe D 2x50W con Bluetooth + alimentatore
  • Amplificatore in Classe D 2x50W con Bluetooth + alimentatore
  • 2x50W Bluetooth Class D amplifier with power supply

AMB2050NR KIT1 - 2x50W Bluetooth Class D amplifier with power supply

New
AMB2050NR KIT1
1 PCS
€ 76.33
Tax included
Quantity
Only few in stock

Description

 

Class D 2x50W Bluetooth amplifier with 24V power supply and power cable

LUXUS AUDIO - AMB2050NR KIT1

The AMB2050NR KIT1 kit consists of a Class D AMB2050NR Amplifier based on the TPA3116D2 chip with integrated bluetooth module, a 24V 6A ALC24V6AJ switching power supply and a CVAIT307515 power cable.

The output power of the class D amplifier is 50W with a supply voltage of 24V. The supported voltage range varies from a minimum of 10V to 24V. Passive loudspeaker drivers varying from a nominal impedance of 4 to 8 ohms.

The sources used, in order to send musical signal to the class D amplifier, can be connected via cable (RCA) or by means of Bluetooth 4.0 protocol, selectable via micro-switch on the board.

Finally, the AMB2050NR amplifier has a VCB (Volume Control Board) port that allows communication and connection (plug & play) between an external digital volume control (not present in the kit) and the class D amplifier.

For more information take a look at this link: AMB2050NR KIT2

amplificatore in classe D Bluetooth con specifiche di collegamento

Dettaglio di connessione amplificatore in classe D

 Technical Specifications Card AMB2050NR 

Parameters Test Conditions Value
Supply Voltages - 10-24V
Maximum current 5.29A 5.29A
Efficiency 50W @ 4Ohm 87% - 92%
Supported Min. Load 3.2Ω
Swhitching frequency 394kHz
Gain 24-26dB
Input Sensitivity (RMS) @4ohm, 50W, 1kHz 808mV
Input impedance 22kΩ
Output Power THD + N 1% @4ohm 36W
Output Power THD + N 10% @4ohm 50W
Bandwidth ± 3dB @4ohm 20Hz - 20kHz
THD (1W) @4ohm, 1kHz 0.0299%
THD (10W) @4ohm, 1kHz 0.073%

Other Features Sheet AMB2050NR

Parameters Specifications
Chip TPA3116D2
Dimensions 6.9 x 9.5cm
Bluetooth  4.0
Amplifier class D

Power Supply Technical Features ALC24V6AJ

Parameters Value
Producer Epson
Output power (W) 144
Output voltage (V) 24
Output current (A) 6
Input voltage (V) Universal Input 110/230
IP classification No IP
Technology AC/DC
Dimming No Dimming
Format DESKTOP
Application ITE EN/UL/IEC 60950
Certification CE/GS/UL/CB/CCC/TUV
Width (mm) 67
Height (mm) 35
Depth (mm) 167
Weight (gr.) 630

Do you want to Customize the product? Follow our Guides!

The card Bluetooth is programmable, just download the programming software and carefully follow the different guides, as needed, as listed below.

The same Bluetooth amplifier therefore allows programming of:

• Connection name change
• Connection password entry
• Automatic disconnection configuration
• MONO output configuration
• Tone management
• DSP configuration (APT-X only)

       How to change the name to Bluetooth          

             Enable the Bluetooth Password           

      Connection / Disc. Auto Bluetooth              

               DSP procedure configuration             

             Mono configuration of Bluetooth         

              Manage Bluetooth Audio Tones         

              Download BlueSuite 2.5                     

   Download CSRXX_ROM_ConfigTool_3.0.64

How can I use it?

Product Details
Brand
Luxus Audio
Chips
TPA3116D2
Output Power [Watt]
50
Channel
2
Power Supply (Volt)
24
16 other products in the same category:
Comments (0)