- Out of Stock
Reference: HELIX P SIX DSP ULT
Brand: Audiotec Fischer
HELIX P SIX DSP ULTIMATE - 6 Channel amplifier with integrated 12 channel DSP
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Discontinued.Replaced with HELIX P SIX DSP ULT
6-channel amplifier with integrated 8-channel DSP |
The HELIX P SIX DSP MK2 6-channel amplifier also incorporates an advanced 8-channel DSP with exceptional processing power. This fusion sets a completely new standard with its "Ultra HD Class D" amplification technology.
Thanks to the 96 kHz sampling rate and the wide audio bandwidth of over 40 kHz, this precision technological skill raises the bar in terms of sound quality.
If we put it aside for a moment, versatility is another important milestone to be reached during the development process. Therefore, we are pleased to present HEC. The HELEC Extension Card (HEC) slot provides to extend the possibilities of the devices in addition to the normal RCA sockets. Interfaces such as a Bluetooth ® audio streaming module or a high resolution USB sound card have been created to offer more options than ever.
Two fully elaborated RCA outputs connectivity connections to connect multiple amplifiers in series without the need for a second DSP.
The configuration of the internal 64-bit DSP could not be simpler thanks to the professional and intuitive PC-Tool DSP software that offers almost unlimited sound optimization capabilities.
Despite this impressive engineering feat, the P SIX DSP MK2 has not lost its HELIX design heritage; it still has a clean design while remaining very compact for easy installation.
Ultra HD Class D amplification technology with 96 kHz sampling frequency
HELIX P SIX DSP MK2 is the first class D amplifier with integrated DSP on the market that operates with a sampling frequency of 96 kHz. Therefore, the audio bandwidth is no longer limited to 22 kHz, but allows a frequency response extended to over 40 kHz. The highest sampling rate was only possible by implementing the latest DSP chipsets and amplifiers. The result: a class D amplifier with an unprecedented sound quality.
Ready for 24 V.
It is possible to use P SIX DSP MK2 with a supply voltage of 12 Volts or 24 Volts (for example, as usual in trucks) without the need to make changes to the unit. In both operating modes the amplifier will have characteristics of equal performance. This guarantees maximum flexibility for numerous applications.
High level intelligent input
The latest generation OE radios incorporate sophisticated diagnostic possibilities for the connected loudspeakers. If a normal amplifier is connected, the results are often error messages and the loss of specific functions (eg fader function), but not with P SIX DSP MK2. The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the OE radio speaker outputs in case of unnecessary high volumes.
Energy saving mode
Energy saving mode is incorporated into the basic settings. It allows to significantly reduce the power consumption of the P SIX DSP MK2 and the connected amplifiers when there is no input signal for more than 60 seconds. Note that in many cars updated with "CAN" or any other internal bus structure it can happen that the radio remains "invisibly" turned on for a maximum of 45 minutes. even after leaving the car! Once the "Energy Saving Mode" is activated, the remote output (Rem Out) and the internal stages of the amplifier will be deactivated. HELIX P SIX DSP MK2 will reactivate the remote output and the internal stages of the amplifier within one second if a musical signal is applied. The switch-off time can be changed by 60 sec. or completely deactivate the "Energy saving mode" via the DSP PC-Tool software.
Start-Stop functionality
The switching power supply of the HELIX P SIX DSP MK2 guarantees a constant internal supply voltage even if the battery voltage drops to 6 volts during the crank of the motor.
Automatic detection of digital signals
The transition from the analog input to the digital input is performed automatically as soon as a signal is detected on the optical input. This function can be deactivated in the DSP PC-Tool software. Alternatively, an optional remote control can be used for manual switching between analogue and digital inputs.
Parameters | Specifications |
RMS output power / max. @ 4 ohms | Channel A - F: 120/240 Watt by channel |
RMS output power / max. @ 2 ohms | Channel C - F: 230/460 Watt by channel |
RMS output power / max. @ 1 Ohm | - |
Amplifier technology | Ultra HD Class D |
Inputs | 6 x RCA / Cinch 6 x High-level speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote input |
Input sensitivity | RCA / Cinch 2 - 4 Volt o 4 - 8 Volt Highlevel 5 - 10 Volt o 10 - 20 Voltt |
Input impedance RCA / Cinch | 64 kOhm |
Input impedance level | 13 ohm o 64 kOhm |
Outputs | 6 x Speaker output 2 x RCA / Cinch 2 x Remote output |
Output voltage RCA / Cinch | 3 Volts RMS |
Frequency response | 20 Hz - 44.000 Hz |
DSP resolution | 64 bit |
DSP power | 295 MHz (1.2 billion MAC / second operations) |
Sampling rate | 96 kHz |
Type of DSP | Audio signal processor |
Signal converters | A / D: BurrBrown D / A: BurrBrown |
Digital signal-to-noise ratio input | 105 dB (A weighted) |
Signal to noise analog input | 100 dB (A weighted) |
Distortion (THD) | <0,008% |
Damping factor | > 100 |
Operating voltage | 10,5 - 32 volt (maximum 5 seconds at 6 volts) |
Inactive current | 2200 mA |
Max. Remote output current | 500 mA |
Fuse | 3 x 20 A LP-Mini-fuse (APS) |
Parameters | Specifications |
Dimensions (H x W x D) | 50 x 260 x 190 mm / 1,97 x 10,24 x 7,48 " |
Other characteristics | HEC slot, ADEP circuit, Auto Remote switch, control input. |
Compatible | Suitable for all car brands and versions. |
Reference: HELIX P SIX DSP ULT
Brand: Audiotec Fischer
Reference: CFMK25 PSA.1
Brand: Audiotec Fischer
Reference: HEC BT-DSP.3S
Brand: Audiotec Fischer
Reference: EX1600EQ_1
Brand: STETSOM
Reference: CI7 W130-S3
Brand: Audiotec Fischer
Reference: MATCH PP-AC 26
Brand: Audiotec Fischer
Reference: MATCH PP-AC 16
Brand: Audiotec Fischer
Reference: HEC BT-DSP MINI
Brand: Audiotec Fischer
Reference: MATCH BC 1
Brand: Audiotec Fischer
Reference: MATCH PP-PAC 80
Brand: Audiotec Fischer
Reference: HELIX HEC USB PSIXDSPULT
Brand: Audiotec Fischer
Reference: HEC BT-PSIX DSP MK2
Brand: Audiotec Fischer
Reference: CB C100.2-S3
Brand: Audiotec Fischer
Reference: HELIX HEC OPT DSP PRO MK2
Brand: Audiotec Fischer
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent